ПА66

PA66 Supplier from China

ПА66 (полиамид 66) and modified PA66 are used in the automotive industry, instrument housings and other products that need impact resistance and high strength. SUNCHEM supplies PA66 grades with a batch COA on every shipment.

Polyamide · PA66 and modified PA66 (например. GF30)
  • Сертификат подлинности партии с каждой поставкой
  • Образцы для ваших испытаний
  • Техническая поддержка вашей пробной версии
МатериалПолиамид
ОценкиPA66 и модифицированный PA66 (например. GF30)
Температура плавленияо 260 °С
ПроцессЛитье под давлением
Документысертификат подлинности / паспорт безопасности / ТДС

Обзор продукта & ключевые преимущества

ПА66 (полиамид 66, нейлон 66) has a higher melting point than PA6, so it keeps its stiffness at higher temperature. Modified PA66 — reinforced, toughened or flame-retardant — is used for automotive parts, instrument housings and other parts that need impact resistance and high strength.

Tell us the part and the grade you use now (for example PA66-GF30); we quote a matching grade and send samples for a molding trial.

Strength and toughness

Polyamides combine stiffness, impact strength and wear resistance for load-bearing parts.

Glass-fiber options

Glass-fiber reinforcement raises stiffness and heat resistance for structural parts.

Уточняется на ваших условиях

We quote against your mechanical and processing requirements and send the batch COA for each lot.

Технические характеристики

ПараметрТипичное значение
Название продуктаПА66
МатериалПолиамид
ОценкиPA66 и модифицированный PA66 (например. GF30)
Температура плавления (typical for the polymer)о 260 °С
ПроцессЛитье под давлением
ФормаPellets

Tensile strength, flexural modulus, impact strength, heat deflection temperature, moisture and flame rating depend on the grade and are stated on the TDS and batch COA; the values for your order are confirmed in the quotation and contract.

Приложения по отраслям

Where PA66 is used, и что необходимо подтвердить перед переключением источника питания.

Automotive parts

Used for engine-bay and structural parts that need strength at higher temperature.

Проверьте перед судом

  • Рабочая температура
  • Glass-fiber content
  • Цвет
Обсудить это приложение →

Instrument and equipment housings

Used for instrument housings and covers that need impact resistance and dimensional stability.

Проверьте перед судом

  • Impact requirement
  • Surface finish
  • Volume
Обсудить это приложение →

Industrial and electrical parts

Used for gears, bearings, connectors and other load-bearing parts.

Проверьте перед судом

  • Flame rating if required
  • Wear requirement
  • Compliance statements
Обсудить это приложение →

Выбор & сравнение

Choosing the right PA66 grade

Ваше требованиеЧто обычно работает
Housings and general partsUnreinforced or lower glass-fiber grade
Structural and under-hood partsGlass-fiber reinforced grade (например. 30% GF)
Electrical parts needing a flame ratingAsk for a flame-retardant grade and its UL data
Замена существующего поставщикаОтправьте текущий TDS или COA; мы цитируем параметры, которые вы утверждаете

Упаковка & хранилище

Упаковка

Tell us the bag size and pallet requirements you need; мы подтверждаем упаковку с предложением.

Хранилище

Keep bags sealed. Polyamides absorb moisture — dry the pellets to the moisture level on the TDS before molding.

От первого электронного письма до одобренной поставки

01

Назовите конечное использование

The part, the load and the temperature it sees: the grade follows from that.

02

Сравните цифры, которые имеют значение

Tensile and flexural properties, impact strength, heat deflection temperature, glass-fiber content and moisture.

03

Dry before molding

Check moisture on arrival and dry to the TDS level; wet pellets cause splay and brittle parts.

04

Пробный, затем заблокируйте спецификацию

Mold trial parts, test them, и сохраните утвержденный сертификат подлинности партии в качестве справочного материала..

Сообщите нам ваше требование. Мы соответствуем рейтингу.

Tell us the part you mold and the grade you use now, количество и порт назначения. Добавьте свою текущую спецификацию, и мы сделаем предложение по ней.

ИнформацияПример
ПриложениеАвтомобильная промышленность, electrical, tools, industrial parts
Требуемая спецификацияGlass-fiber %, цвет, flame rating
УпаковкаРазмер сумки; поддоны
КоличествоОбразец / пробный заказ / годовой объем
Место назначенияСтрана и порт
Необходимые документысертификат подлинности, паспорт безопасности, ТДС, RoHS/REACH

Электронная почта david@sunchemgroup.com

Сопутствующие товары

PA66 FAQ

What is PA66 used for?

Used for engine-bay and structural parts that need strength at higher temperature. Used for instrument housings and covers that need impact resistance and dimensional stability. Used for gears, bearings, connectors and other load-bearing parts.

Which properties should I compare between offers?

Glass-fiber content, tensile and flexural strength, impact strength, heat deflection temperature and moisture.

Do I need to dry the pellets?

Да. Polyamides absorb moisture; dry to the level on the TDS before molding.

Can you match my current grade?

Send your current TDS; we quote a grade against the properties you approve and send samples for a molding trial.

Discuss your PA66 requirements

Запросить цену
лупа