ПА6

PA6 Supplier from China

ПА6 (полиамид 6) is an engineering plastic for automotive parts, tool parts, electrical and electronic components and general manufacturing. SUNCHEM supplies PA6 injection grades with 15% а также 30% glass fiber in natural color, with a batch COA on every shipment.

Polyamide · PA6-15 (15% GF), P6-30 (30% GF)
  • Сертификат подлинности партии с каждой поставкой
  • Образцы для ваших испытаний
  • Техническая поддержка вашей пробной версии
МатериалПолиамид
ОценкиP6-15 (15% GF), P6-30 (30% GF)
Температура плавленияо 220 °С
ПроцессЛитье под давлением
Документысертификат подлинности / паспорт безопасности / ТДС

Обзор продукта & ключевые преимущества

ПА6 (полиамид 6, нейлон 6) is a tough, wear-resistant engineering plastic. Glass-fiber reinforcement raises its stiffness and heat resistance, so reinforced PA6 replaces metal in many automotive, tool and electrical parts.

The grades on this page are injection grades in natural color: PA6-15 with 15% glass fiber and PA6-30 with 30% стекловолокно. Other grades and colors are quoted on request.

Strength and toughness

Polyamides combine stiffness, impact strength and wear resistance for load-bearing parts.

Glass-fiber options

Glass-fiber reinforcement raises stiffness and heat resistance for structural parts.

Уточняется на ваших условиях

We quote against your mechanical and processing requirements and send the batch COA for each lot.

Технические характеристики

ПараметрТипичное значение
Название продуктаПА6
МатериалПолиамид
ОценкиP6-15 (15% GF), P6-30 (30% GF)
Температура плавления (typical for the polymer)о 220 °С
ПроцессЛитье под давлением
ФормаPellets

Tensile strength, flexural modulus, impact strength, heat deflection temperature, moisture and flame rating depend on the grade and are stated on the TDS and batch COA; the values for your order are confirmed in the quotation and contract.

Приложения по отраслям

Where PA6 is used, и что необходимо подтвердить перед переключением источника питания.

Выбор & сравнение

Choosing the right PA6 grade

Ваше требованиеЧто обычно работает
Housings and general partsUnreinforced or lower glass-fiber grade
Structural and under-hood partsGlass-fiber reinforced grade (например. 30% GF)
Electrical parts needing a flame ratingAsk for a flame-retardant grade and its UL data
Замена существующего поставщикаОтправьте текущий TDS или COA; мы цитируем параметры, которые вы утверждаете

Упаковка & хранилище

Упаковка

Tell us the bag size and pallet requirements you need; мы подтверждаем упаковку с предложением.

Хранилище

Keep bags sealed. Polyamides absorb moisture — dry the pellets to the moisture level on the TDS before molding.

От первого электронного письма до одобренной поставки

01

Назовите конечное использование

The part, the load and the temperature it sees: the grade follows from that.

02

Сравните цифры, которые имеют значение

Tensile and flexural properties, impact strength, heat deflection temperature, glass-fiber content and moisture.

03

Dry before molding

Check moisture on arrival and dry to the TDS level; wet pellets cause splay and brittle parts.

04

Пробный, затем заблокируйте спецификацию

Mold trial parts, test them, и сохраните утвержденный сертификат подлинности партии в качестве справочного материала..

Сообщите нам ваше требование. Мы соответствуем рейтингу.

Tell us the part you mold and the grade you use now, количество и порт назначения. Добавьте свою текущую спецификацию, и мы сделаем предложение по ней.

ИнформацияПример
ПриложениеАвтомобильная промышленность, electrical, tools, industrial parts
Требуемая спецификацияGlass-fiber %, цвет, flame rating
УпаковкаРазмер сумки; поддоны
КоличествоОбразец / пробный заказ / годовой объем
Место назначенияСтрана и порт
Необходимые документысертификат подлинности, паспорт безопасности, ТДС, RoHS/REACH

Электронная почта david@sunchemgroup.com

Сопутствующие товары

PA6 FAQ

What is PA6 used for?

Used for brackets, covers, fan shrouds and other parts that need stiffness and toughness. Used for power-tool housings and tool components that need impact strength. Used for connectors, housings and switch parts.

Which properties should I compare between offers?

Glass-fiber content, tensile and flexural strength, impact strength, heat deflection temperature and moisture.

Do I need to dry the pellets?

Да. Polyamides absorb moisture; dry to the level on the TDS before molding.

Can you match my current grade?

Send your current TDS; we quote a grade against the properties you approve and send samples for a molding trial.

Discuss your PA6 requirements

Запросить цену
лупа