MC

メラミンシアヌレート (MC) 中国からのサプライヤー

Melamine cyanurate (MC) is a halogen-free nitrogen flame retardant for unreinforced PA6 and PA66, TPU and other polymers. SUNCHEM supplies melamine cyanurate with a batch COA on every shipment; TDS はリクエストに応じて送信されます.

CAS 37640-57-6 · C₆H₉N₉O₃ · Melamine–cyanuric acid salt
  • 出荷ごとのロット COA
  • トライアル用のサンプル
  • 試用版の技術サポート
CAS番号.37640-57-6
式C₆H₉N₉O₃
モル. 重さ255.2
タイプNitrogen flame retardant
形状白い粉

製品概要 & 主な利点

Melamine cyanurate is a salt of melamine and cyanuric acid. Above about 320 °C it decomposes endothermically, releasing inert nitrogen gases that dilute the flame and helping the melt drip away from the flame. That makes it the standard halogen-free flame retardant for unreinforced PA6 and PA66 reaching UL 94 v-0, and it is also used in TPU, epoxy and other polymers.

Fine, uniform particle size matters for mechanical properties and surface finish; purity and whiteness matter for light colors.

Halogen-free for polyamides

Gives unreinforced PA6 and PA66 UL 94 v-0 without halogens.

Clean and white

White powder with low smoke and no corrosive gas.

Specified on your terms

私たちはあなたの純粋さに反して引用します, 粒子サイズ, moisture and whiteness and send the batch COA for each lot.

技術仕様

パラメータ代表値
製品名メラミンシアヌレート
同義語MC; MCA; melamine–cyanuric acid compound
CAS番号.37640-57-6
分子式C₆H₉N₉O₃
分子量255.2
外観白い粉

純度, 粒子サイズ, moisture and whiteness limits depend on the producer grade and are stated on the TDS and batch COA; 注文の限度額は見積書と契約書で確認されます.

ポリマー別の用途

Where MC is used, 電源を切り替える前に確認すべきこと.

選択 & 比較

Choosing the right MC grade

あなたの要件通常機能するもの
Unreinforced PA6 / PA66Standard MC with fine particle size
TPU and thin filmsSpecify finer particle size
Glass-filled polyamidesAsk: MC alone is usually not enough; phosphorus systems are used
既存のサプライヤーを置き換える現在の TDS または COA を送信します; あなたが承認したパラメータに基づいて見積もりを出します

包装 & ストレージ

包装

Tell us the bag or drum size and pallet requirements you need; 見積書で梱包を確認します.

ストレージ

Keep bags closed in a dry store.

最初のメールから承認された供給まで

01

Name the end use

Name the polymer and the fire rating you must meet — UL 94 class and thickness, LOI or cable standard.

02

重要な数字を比較する

純度, 粒子サイズ (D50 and D98), moisture and whiteness.

03

Check dispersion

Particle size and dispersion decide impact strength; compare mechanical results, not only the fire test.

04

トライアル, 次に仕様をロックします

Compound a trial batch, run your fire and mechanical tests, and keep the approved lot COA as the reference.

ご要望をお聞かせください. グレードを合わせます.

ポリマーを教えてください, the fire rating you need, 数量と宛先ポート. 現在の仕様を追加してください。それに基づいて見積もりを出します.

情報例
応用PA6, PA66, TPU, エポキシ
要求仕様純度, 粒子サイズ, 白さ
包装Bag or drum size; pallets
量サンプル / お試し注文 / 年間生産量
行き先国と港
必要な書類COA, SDS, TDS, RoHS/REACH

電子メール david@sunchemgroup.com

関連商品

ポリリン酸アンモニウム

Intumescent flame retardant for coatings, PP and epoxy.

製品を見る→

後

Reactive phosphorus flame retardant for halogen-free epoxy.

製品を見る→

水酸化マグネシウム

Mineral flame retardant for higher processing temperatures.

製品を見る→

メラミンシアヌレート (MC) よくある質問

What is melamine cyanurate used for?

As a halogen-free flame retardant for unreinforced PA6 and PA66, TPU, epoxy and other polymers.

Is MC suitable for glass-filled nylon?

Usually not on its own; glass-filled polyamides normally use phosphorus-based systems.

オファー間でどのパラメータを比較する必要があるか?

純度, 粒子サイズ, moisture and whiteness.

TDSを入手できますか?

はい. Send an inquiry with your polymer and target rating and we email the TDS.

Discuss your Melamine Cyanurate (MC) 要件

見積もりを依頼する
拡大鏡