Strength and toughness
Polyamides combine stiffness, impact strength and wear resistance for load-bearing parts.
PA6
PA6 Supplier from China
PA6 (폴리아미드 6) is an engineering plastic for automotive parts, tool parts, electrical and electronic components and general manufacturing. SUNCHEM supplies PA6 injection grades with 15% 그리고 30% glass fiber in natural color, with a batch COA on every shipment.
Polyamide · PA6-15 (15% GF), PA6-30 (30% GF)
- 모든 배송에 대한 로트 COA
- 시험용 샘플
- 평가판에 대한 기술 지원
제품개요 & 주요 이점
PA6 (폴리아미드 6, 나일론 6) is a tough, wear-resistant engineering plastic. Glass-fiber reinforcement raises its stiffness and heat resistance, so reinforced PA6 replaces metal in many automotive, tool and electrical parts.
The grades on this page are injection grades in natural color: PA6-15 with 15% glass fiber and PA6-30 with 30% 유리 섬유. Other grades and colors are quoted on request.
Glass-fiber options
Glass-fiber reinforcement raises stiffness and heat resistance for structural parts.
귀하의 조건에 따라 지정됨
We quote against your mechanical and processing requirements and send the batch COA for each lot.
기술 사양
| 매개변수 | 일반적인 값 |
|---|---|
| 제품명 | PA6 |
| 재료 | 폴리아미드 |
| 등급 | PA6-15 (15% GF), PA6-30 (30% GF) |
| 녹는 점 (typical for the polymer) | ~에 대한 220 ℃ |
| Process | 사출 성형 |
| 형태 | Pellets |
Tensile strength, flexural modulus, impact strength, heat deflection temperature, moisture and flame rating depend on the grade and are stated on the TDS and batch COA; the values for your order are confirmed in the quotation and contract.
산업별 애플리케이션
Where PA6 is used, 공급을 전환하기 전에 확인해야 할 사항.
Automotive parts
Used for brackets, covers, fan shrouds and other parts that need stiffness and toughness.
시험 전 확인
- Part and load
- Glass-fiber content
- 색상
Tool parts
Used for power-tool housings and tool components that need impact strength.
시험 전 확인
- Impact requirement
- Surface finish
- Volume
Electrical and electronic parts
Used for connectors, housings and switch parts.
시험 전 확인
- Flame rating if required
- 색상
- Compliance statements
선택 & 비교
Choosing the right PA6 grade
| 귀하의 요구 사항 | 일반적으로 작동하는 것 |
|---|---|
| Housings and general parts | Unreinforced or lower glass-fiber grade |
| Structural and under-hood parts | Glass-fiber reinforced grade (예를 들어. 30% GF) |
| Electrical parts needing a flame rating | Ask for a flame-retardant grade and its UL data |
| 기존 공급업체 교체 | 현재 TDS 또는 COA 보내기; 우리는 귀하가 승인한 매개변수에 대해 견적을 내립니다. |
포장 & 저장
포장
Tell us the bag size and pallet requirements you need; we confirm the packaging with the quotation.
저장
Keep bags sealed. Polyamides absorb moisture — dry the pellets to the moisture level on the TDS before molding.
첫 번째 이메일부터 승인된 공급까지
최종 용도의 이름을 지정하세요.
The part, the load and the temperature it sees: the grade follows from that.
중요한 숫자를 비교하세요
Tensile and flexural properties, impact strength, heat deflection temperature, glass-fiber content and moisture.
Dry before molding
Check moisture on arrival and dry to the TDS level; wet pellets cause splay and brittle parts.
재판, 그런 다음 사양을 잠급니다.
Mold trial parts, test them, 승인된 로트 COA를 참조로 유지하세요..
귀하의 요구 사항을 알려주십시오. 우리는 등급을 일치.
Tell us the part you mold and the grade you use now, 수량 및 대상 포트. 현재 사양을 추가하면 이에 대한 견적을 보내드립니다..
| 정보 | 예 |
|---|---|
| 애플리케이션 | 자동차, electrical, tools, industrial parts |
| 필수사양 | Glass-fiber %, 색상, flame rating |
| 포장 | 가방 크기; 팔레트 |
| 수량 | 견본 / 평가판 주문 / 연간 볼륨 |
| 목적지 | 국가 및 항구 |
| 필요한 서류 | COA, SDS, TDS, RoHS 준수/도달 |
관련상품
PA6 FAQ
What is PA6 used for?
Used for brackets, covers, fan shrouds and other parts that need stiffness and toughness. Used for power-tool housings and tool components that need impact strength. Used for connectors, housings and switch parts.
Which properties should I compare between offers?
Glass-fiber content, tensile and flexural strength, impact strength, heat deflection temperature and moisture.
Do I need to dry the pellets?
예. Polyamides absorb moisture; dry to the level on the TDS before molding.
Can you match my current grade?
Send your current TDS; we quote a grade against the properties you approve and send samples for a molding trial.
