Strength and toughness
Polyamides combine stiffness, impact strength and wear resistance for load-bearing parts.
PA6
PA6 Supplier from China
PA6 (polyamide 6) is an engineering plastic for automotive parts, tool parts, electrical and electronic components and general manufacturing. SUNCHEM supplies PA6 injection grades with 15% と 30% glass fiber in natural color, with a batch COA on every shipment.
Polyamide · PA6-15 (15% GF), PA6-30 (30% GF)
- 出荷ごとのロット COA
- トライアル用のサンプル
- 試用版の技術サポート
製品概要 & 主な利点
PA6 (polyamide 6, ナイロン 6) is a tough, wear-resistant engineering plastic. Glass-fiber reinforcement raises its stiffness and heat resistance, so reinforced PA6 replaces metal in many automotive, tool and electrical parts.
The grades on this page are injection grades in natural color: PA6-15 with 15% glass fiber and PA6-30 with 30% ガラス繊維. Other grades and colors are quoted on request.
Glass-fiber options
Glass-fiber reinforcement raises stiffness and heat resistance for structural parts.
Specified on your terms
We quote against your mechanical and processing requirements and send the batch COA for each lot.
技術仕様
| パラメータ | 代表値 |
|---|---|
| 製品名 | PA6 |
| 材料 | ポリアミド |
| グレード | PA6-15 (15% GF), PA6-30 (30% GF) |
| 融点 (typical for the polymer) | について 220 ℃ |
| Process | 射出成形 |
| 形状 | Pellets |
Tensile strength, flexural modulus, impact strength, heat deflection temperature, moisture and flame rating depend on the grade and are stated on the TDS and batch COA; the values for your order are confirmed in the quotation and contract.
業界別のアプリケーション
Where PA6 is used, 電源を切り替える前に確認すべきこと.
Automotive parts
Used for brackets, covers, fan shrouds and other parts that need stiffness and toughness.
トライアル前に確認してください
- Part and load
- Glass-fiber content
- 色
Tool parts
Used for power-tool housings and tool components that need impact strength.
トライアル前に確認してください
- Impact requirement
- Surface finish
- 音量
Electrical and electronic parts
Used for connectors, housings and switch parts.
トライアル前に確認してください
- Flame rating if required
- 色
- Compliance statements
選択 & 比較
Choosing the right PA6 grade
| あなたの要件 | 通常機能するもの |
|---|---|
| Housings and general parts | Unreinforced or lower glass-fiber grade |
| Structural and under-hood parts | Glass-fiber reinforced grade (例えば. 30% GF) |
| Electrical parts needing a flame rating | Ask for a flame-retardant grade and its UL data |
| 既存のサプライヤーを置き換える | 現在の TDS または COA を送信します; あなたが承認したパラメータに基づいて見積もりを出します |
包装 & ストレージ
包装
Tell us the bag size and pallet requirements you need; 見積書で梱包を確認します.
ストレージ
Keep bags sealed. Polyamides absorb moisture — dry the pellets to the moisture level on the TDS before molding.
最初のメールから承認された供給まで
Name the end use
The part, the load and the temperature it sees: the grade follows from that.
重要な数字を比較する
Tensile and flexural properties, impact strength, heat deflection temperature, glass-fiber content and moisture.
Dry before molding
Check moisture on arrival and dry to the TDS level; wet pellets cause splay and brittle parts.
トライアル, 次に仕様をロックします
Mold trial parts, test them, and keep the approved lot COA as the reference.
ご要望をお聞かせください. グレードを合わせます.
Tell us the part you mold and the grade you use now, 数量と宛先ポート. 現在の仕様を追加してください。それに基づいて見積もりを出します.
| 情報 | 例 |
|---|---|
| 応用 | 自動車, electrical, tools, industrial parts |
| 要求仕様 | Glass-fiber %, 色, flame rating |
| 包装 | Bag size; pallets |
| 量 | サンプル / お試し注文 / 年間生産量 |
| 行き先 | 国と港 |
| 必要な書類 | COA, SDS, TDS, RoHS/REACH |
関連商品
PA6 FAQ
What is PA6 used for?
Used for brackets, covers, fan shrouds and other parts that need stiffness and toughness. Used for power-tool housings and tool components that need impact strength. Used for connectors, housings and switch parts.
Which properties should I compare between offers?
Glass-fiber content, tensile and flexural strength, impact strength, heat deflection temperature and moisture.
Do I need to dry the pellets?
はい. Polyamides absorb moisture; dry to the level on the TDS before molding.
Can you match my current grade?
Send your current TDS; we quote a grade against the properties you approve and send samples for a molding trial.
