Titanium source for grain refiners
The standard titanium salt for Al–Ti and Al–Ti–B master alloys made by the halide-salt route.
K₂TiF₆
Fluotitanate de potassium (K₂TiF₆) Supplier from China
Potassium fluotitanate (potassium hexafluorotitanate, K₂TiF₆) is the titanium source for Al–Ti and Al–Ti–B grain-refining master alloys, and an intermediate for titanium chemicals and catalysts. Fournitures SUNCHEM 98.0% min. K₂TiF₆ white powder with a batch COA on every shipment.
CAS 16919-27-0 · K₂TiF₆ · Potassium hexafluorotitanate
- Lot de COA avec chaque expédition
- Des échantillons pour vos essais
- Support technique pour votre essai
Présentation du produit & avantages clés
In aluminum alloy plants, K₂TiF₆ is reacted with molten aluminum — usually together with potassium fluoroborate — to make Al–Ti and Al–Ti–B master alloys. The fine TiAl₃ and TiB₂ particles they contain refine the grain of cast and wrought aluminum. K₂TiF₆ is also used to produce titanium metal and titanic acid, and in catalyst preparation.
Buyers usually compare assay, moisture and impurities such as iron, silicon and lead, because these carry straight into the master alloy.
Blends with fluoroborate
White powder that is mixed with potassium fluoroborate before charging into molten aluminum.
Impurities on the COA
We quote against your assay, moisture and impurity limits and send the batch COA for each lot.
Spécifications techniques
| Parameter | Typical value |
|---|---|
| Nom du produit | Fluotitanate de potassium |
| Synonymes | Potassium hexafluorotitanate; dipotassium hexafluorotitanate |
| Numéro CAS. | 16919-27-0 |
| EC No. | 240-969-9 |
| Molecular formula | K₂TiF₆ |
| Poids moléculaire | 240.05 |
| Apparence | Poudre blanche |
| Essai | ≥98.0% |
Appearance and assay are typical values for our standard grade. Moisture, iron, silicon and lead limits depend on the producer grade and are stated on the TDS and batch COA; the limits for your order are confirmed in the quotation and contract.
Applications by Industry
Where K₂TiF₆ is used, and what to confirm before you switch supply.
Al–Ti and Al–Ti–B master alloys
Reacted with molten aluminum, usually with potassium fluoroborate, to make grain refiners for aluminum casting and rolling.
Check before trial
- Target Ti and B content of the master alloy
- Iron, silicon and moisture limits
- Monthly volume
Titanium metal & titanic acid
A feed for titanium metal and titanic acid production.
Check before trial
- Purity required for your process
- Pack size
- Delivery rhythm
Catalyst preparation & other uses
Used in catalyst preparation and other fluorotitanate chemistry.
Check before trial
- Impurity limits for your catalyst
- Sample size for a lab trial
- Documents you need
Selection & comparaison
Choosing for your process
| Your requirement | What usually works |
|---|---|
| Al–Ti–B grain-refiner production | K₂TiF₆ with potassium fluoroborate (KBF₄) |
| Low iron in the master alloy | Agree iron and silicon limits before sampling |
| Replacing an existing supplier | Send your current TDS or COA; we quote against the parameters you approve |
Emballage & stockage
Emballage
Pack size is confirmed with the quotation.
Storage
Keep in closed containers in a dry place, away from acids: contact with strong acids can release hydrogen fluoride. Follow the SDS.
Du premier e-mail à la fourniture approuvée
Name the product you make
Master alloy, titanium chemical or catalyst: tell us which one and its target composition.
Compare the numbers that matter
Essai, humidité, iron, silicon and lead. Ask for them on the same COA template as your incoming inspection.
Keep it dry
Moisture in the salt adds hydrogen to the melt. Check packaging on arrival and keep opened bags sealed.
Trial, then lock the spec
Run a sample in your own process and keep the approved lot COA as the reference for contract limits.
Dites-nous votre besoin. Nous correspondons à la note.
Tell us what you make with K₂TiF₆, the quantity and the destination port. Add your current specification and we will quote against it.
| Information | Example |
|---|---|
| Application | Al–Ti–B master alloy, titanium chemicals, catalyst |
| Required specification | Essai, humidité, Fe, Et, Pb |
| Quantity | Trial order / monthly / annual volume |
| Destination | Country and port |
| Documents needed | COA, FDS, DT |
Potassium Fluotitanate FAQ
What is potassium fluotitanate used for?
Mainly as the titanium source for Al–Ti and Al–Ti–B grain-refining master alloys. It is also used for titanium metal and titanic acid production and in catalyst preparation.
What purity do you supply?
Our standard grade is 98.0% min. essai, poudre blanche. Moisture and impurity limits are stated on the TDS and batch COA.
Which impurities matter for master alloys?
Iron, silicon, lead and moisture, because they carry into the alloy. Send your limits and we will quote against them.
How should K₂TiF₆ be stored?
In closed containers in a dry place, away from acids, which can release hydrogen fluoride. Follow the SDS for handling.
