Strength and toughness
Polyamides combine stiffness, impact strength and wear resistance for load-bearing parts.
PA6
PA6 Supplier from China
PA6 (polyamide 6) is an engineering plastic for automotive parts, tool parts, electrical and electronic components and general manufacturing. SUNCHEM supplies PA6 injection grades with 15% et 30% glass fiber in natural color, avec un COA par lots sur chaque expédition.
Polyamide · PA6-15 (15% GF), PA6-30 (30% GF)
- Lot de COA avec chaque expédition
- Des échantillons pour vos essais
- Support technique pour votre essai
Présentation du produit & avantages clés
PA6 (polyamide 6, nylon 6) is a tough, wear-resistant engineering plastic. Glass-fiber reinforcement raises its stiffness and heat resistance, so reinforced PA6 replaces metal in many automotive, tool and electrical parts.
The grades on this page are injection grades in natural color: PA6-15 with 15% glass fiber and PA6-30 with 30% fibres de verre. Other grades and colors are quoted on request.
Glass-fiber options
Glass-fiber reinforcement raises stiffness and heat resistance for structural parts.
Spécifié selon vos conditions
We quote against your mechanical and processing requirements and send the batch COA for each lot.
Spécifications techniques
| Paramètre | Valeur typique |
|---|---|
| Nom du produit | PA6 |
| Matériel | Polyamide |
| Notes | PA6-15 (15% GF), PA6-30 (30% GF) |
| Point de fusion (typical for the polymer) | sur 220 °C |
| Process | Moulage par injection |
| Formulaire | Pellets |
Tensile strength, flexural modulus, impact strength, heat deflection temperature, moisture and flame rating depend on the grade and are stated on the TDS and batch COA; the values for your order are confirmed in the quotation and contract.
Applications par industrie
Where PA6 is used, et que confirmer avant de changer d'approvisionnement.
Automotive parts
Used for brackets, covers, fan shrouds and other parts that need stiffness and toughness.
Vérifiez avant l'essai
- Part and load
- Glass-fiber content
- Couleur
Pièces d'outils
Used for power-tool housings and tool components that need impact strength.
Vérifiez avant l'essai
- Impact requirement
- Surface finish
- Volume
Electrical and electronic parts
Used for connectors, housings and switch parts.
Vérifiez avant l'essai
- Flame rating if required
- Couleur
- Compliance statements
Sélection & comparaison
Choosing the right PA6 grade
| Votre exigence | Ce qui fonctionne habituellement |
|---|---|
| Housings and general parts | Unreinforced or lower glass-fiber grade |
| Structural and under-hood parts | Glass-fiber reinforced grade (par exemple. 30% GF) |
| Electrical parts needing a flame rating | Ask for a flame-retardant grade and its UL data |
| Remplacer un fournisseur existant | Envoyez votre TDS ou COA actuel; nous citons en fonction des paramètres que vous approuvez |
Emballage & stockage
Emballage
Tell us the bag size and pallet requirements you need; nous confirmons l'emballage avec le devis.
Stockage
Keep bags sealed. Polyamides absorb moisture — dry the pellets to the moisture level on the TDS before molding.
Du premier e-mail à la fourniture approuvée
Nommer l'utilisation finale
The part, the load and the temperature it sees: the grade follows from that.
Comparez les chiffres qui comptent
Tensile and flexural properties, impact strength, heat deflection temperature, glass-fiber content and moisture.
Dry before molding
Check moisture on arrival and dry to the TDS level; wet pellets cause splay and brittle parts.
Procès, puis verrouillez la spécification
Mold trial parts, test them, et conserver le COA du lot approuvé comme référence.
Dites-nous votre besoin. Nous correspondons à la note.
Tell us the part you mold and the grade you use now, la quantité et le port de destination. Ajoutez vos spécifications actuelles et nous établirons un devis en fonction de celles-ci.
| Information | Exemple |
|---|---|
| Application | Automobile, electrical, tools, industrial parts |
| Spécification requise | Glass-fiber %, Couleur, flame rating |
| Emballage | Taille du sac; palettes |
| Quantité | Échantillon / commande à l'essai / volume annuel |
| Destination | Pays et port |
| Documents nécessaires | COA, FDS, DT, RoHS/REACH |
Produits associés
PVDF DS201
Fluoropolymer resin; dissolved in DMAC or NMP for membranes and coatings.
Voir le produit →PA6 FAQ
What is PA6 used for?
Used for brackets, covers, fan shrouds and other parts that need stiffness and toughness. Used for power-tool housings and tool components that need impact strength. Used for connectors, housings and switch parts.
Which properties should I compare between offers?
Glass-fiber content, tensile and flexural strength, impact strength, heat deflection temperature and moisture.
Do I need to dry the pellets?
Oui. Polyamides absorb moisture; dry to the level on the TDS before molding.
Can you match my current grade?
Send your current TDS; we quote a grade against the properties you approve and send samples for a molding trial.
