Vinyl MQ resin is a three-dimensional silicone resin of M (R₃SiO½) and Q (SiO₄/₂) units carrying vinyl groups. It reacts into platinum-cured silicone, reinforcing LSR, LED encapsulants and pressure-sensitive adhesives without the haze of a filler. It is supplied neat or as a solution in vinyl silicone fluid.
28 products on this page · CAS numbers listed per product
Vinyl MQ resin is a three-dimensional silicone resin of M (R₃SiO½) and Q (SiO₄/₂) units carrying vinyl groups. It reacts into platinum-cured silicone, reinforcing LSR, LED encapsulants and pressure-sensitive adhesives without the haze of a filler. It is supplied neat or as a solution in vinyl silicone fluid.
Strengthens addition-cure silicone without the light scattering of fumed silica.
Vinyl groups crosslink with Si–H, so the resin is bound in.
Phenyl vinyl MQ for LED encapsulants, lenses and light guides.
Every product we supply in this family, with its CAS number. Typical values come from the grade TDS; the limits that apply to your order are confirmed in the quotation and contract.
| Product | CAS No. | Key specification | |
|---|---|---|---|
| Methyl vinyl MQ resin, neat (100 % resin) | Vinyl content, viscosity per TDS | ||
| Methyl vinyl MQ resin, 70 % in vinyl silicone fluid | Vinyl content, viscosity per TDS | ||
| Methyl vinyl MQ resin, 60 % in vinyl silicone fluid | Vinyl content, viscosity per TDS | ||
| Methyl vinyl MQ resin, 50 % in vinyl silicone fluid | Vinyl content, viscosity per TDS | ||
| Phenyl vinyl MQ resin, RI class ≈ 1.51 | Vinyl content, viscosity, RI per TDS | ||
| Phenyl vinyl MQ resin, RI class ≈ 1.52–1.53 | Vinyl content, viscosity, RI per TDS | ||
| Phenyl vinyl MQ resin, RI class ≈ 1.54 | Vinyl content, viscosity, RI per TDS |
Raises hardness and tear strength of addition-cure LSR and RTV-2.
Si–H to vinyl ratio after adding resin.
Phenyl vinyl grades for clear, high-RI encapsulants.
Refractive-index match; yellowing after heat aging.
Tackifying component of silicone PSA.
Resin-to-polymer ratio.
Controlled-release additive in addition-cure liners.
Release force at your peel speed.
| Your requirement | What usually works |
|---|---|
| Harder, stronger cured rubber | Higher vinyl content grade; rebalance the Si–H crosslinker. |
| Clear, high-refractive-index part | Phenyl vinyl MQ matched to your phenyl polymer. |
| Easy blending | Resin pre-dissolved in vinyl silicone fluid. |
| Replacing an existing grade | Send your current grade and TDS. |
Confirm packaging requirements in the quotation.
Keep sealed in a cool, dry place away from heat and moisture. See the SDS for full handling details.
Regular grades are usually in stock. For large volumes, lead time is confirmed in the quotation. We quote FOB and CIF.
Tell us the property you need and where the product goes — that narrows the grade.
Send the product name or TDS you use today; we match the key numbers.
Put both specifications side by side, with units and test methods.
Agree packaging, monthly volume, COA limits and Incoterms before the first order.
Send the product name or CAS, quantity and destination. We reply by email with pricing, availability and documents.
| Information | Example |
|---|---|
| Application | What the product goes into |
| Current product | Grade or supplier you use today |
| Required specification | Your TDS, COA or key limits |
| Quantity | Trial / monthly / annual volume |
| Destination | Country and port |
| Documents needed | COA, TDS, SDS |
Start near your current resin and adjust the Si–H crosslinker so the Si–H to vinyl ratio stays in range; confirm hardness in a trial.
The neat resin is very viscous or solid; a solution in vinyl fluid is easier to blend. Note the resin content when comparing grades.
Free samples are available for buyers evaluating the product for production use. Shipping cost is agreed case by case.
Every batch ships with a COA; TDS available on request.
Send your application and current grade. We reply with a matching grade, TDS and quotation.