SUNCHEM SILICONES · SILICONE FLUIDS

Hydroxy Silicone Fluids & 107 Polymers

Hydroxy (silanol)-terminated polydimethylsiloxane, called 107 rubber in China, is the base polymer of condensation-cure RTV silicone. Low-viscosity hydroxy fluids are used as structure-control agents and processing aids.

22 products on this page · CAS numbers listed per product

Products
22
Group
Silicone Fluids
Documents
COA · TDS · SDS
Terms
FOB · CIF

Product overview & key benefits

Hydroxy (silanol)-terminated polydimethylsiloxane, called 107 rubber in China, is the base polymer of condensation-cure RTV silicone. Low-viscosity hydroxy fluids are used as structure-control agents and processing aids.

RTV sealant base polymer

Cured with oxime, acetoxy or alkoxy crosslinkers.

Viscosity choice

Grades from a few hundred to 150,000 cP and above.

Structure control

Low-viscosity hydroxy fluids for HCR compounding.

Products & specifications

Every product we supply in this family, with its CAS number. Typical values come from the grade TDS; the limits that apply to your order are confirmed in the quotation and contract.

ProductCAS No.Key specificationAction
Silanol terminated polydimethylsiloxane70131-67-8TDS on request
羟基硅油(低粘度)TDS on request
羟基硅油TDS on request
羟基硅油TDS on request
Hydroxypropyl terminated polydimethylsiloxaneTDS on request
Hydroxy terminated dimethyl-methylvinyl polysiloxane copolymer67923-19-7TDS on request
Silanol terminated polydimethylsiloxane70131-67-8TDS on request
Alkoxy terminated silicone polymerTDS on request
Oh terminated phenyl silicone polymerTDS on request
Oh terminated fluoro silicone polymer68607-77-2TDS on request
Hydroxy-terminated PDMS (107 polymer), 750 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 1,500 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 2,000 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 3,500 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 4,000 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 5,000 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 6,000 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 10,000 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 20,000 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 50,000 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 80,000 cP class70131-67-8Viscosity class; tolerance per TDS
Hydroxy-terminated PDMS (107 polymer), 150,000 cP class70131-67-8Viscosity class; tolerance per TDS

Documents & quality

COA
Certificate of Analysis, per batch
TDS
Technical Data Sheet, per grade
SDS
Safety Data Sheet
Samples
Free samples for production evaluation
Request COA / TDS →

Applications by end use

One-component sealants

Neutral and acetoxy RTV-1.

Check before trial

Viscosity for extrusion rate.

Two-component RTV

Mould-making and potting.

Check before trial

Crosslinker and catalyst.

HCR compounding

Structure-control agent.

Check before trial

Hydroxyl content.

Selection & comparison

Selecting a product

Your requirementWhat usually works
SealantsMedium to high viscosity 107 polymers.
Potting, low viscosity RTVLow viscosity 107 polymers.
HCR processing aidLow-viscosity hydroxy fluids.
SpecialPhenyl, fluoro, vinyl or alkoxy end-capped polymers.

Packaging & storage

Packaging

Confirm packaging requirements in the quotation.

Storage

Keep sealed in a cool, dry place away from heat and moisture. See the SDS for full handling details.

Lead time & terms

Regular grades are usually in stock. For large volumes, lead time is confirmed in the quotation. We quote FOB and CIF.

From first email to approved supply

01

Name the job

Tell us the property you need and where the product goes — that narrows the grade.

02

Share your current grade

Send the product name or TDS you use today; we match the key numbers.

03

Compare the numbers that matter

Put both specifications side by side, with units and test methods.

04

Lock in supply terms

Agree packaging, monthly volume, COA limits and Incoterms before the first order.

Request a Quote

Send the product name or CAS, quantity and destination. We reply by email with pricing, availability and documents.

InformationExample
ApplicationWhat the product goes into
Current productGrade or supplier you use today
Required specificationYour TDS, COA or key limits
QuantityTrial / monthly / annual volume
DestinationCountry and port
Documents neededCOA, TDS, SDS
Request a QuoteEmaildavid@sunchemgroup.com

Related products

Oxime & Acetoxy Silane Crosslinkers

16 products

View products →

Dimethyl Silicone Fluids (PDMS)

2 products

View products →

Hydrophilic Fumed Silica

7 products

View products →

Hydroxy silicone fluids & 107 FAQ

What does the viscosity of 107 rubber change?

Higher viscosity gives higher strength and modulus but harder extrusion; many formulators blend two grades.

Can I get a sample before ordering?

Free samples are available for buyers evaluating the product for production use. Shipping cost is agreed case by case.

Do you supply a COA with every shipment?

Every batch ships with a COA; TDS available on request.

Discuss your Hydroxy silicone fluids & 107 requirements

Send your application and current grade. We reply with a matching grade, TDS and quotation.

Request a QuoteRequest COA / TDS
Request a Quote
magnifier