Amino silanes carry a primary or secondary amine on one end and hydrolysable methoxy or ethoxy groups on the other. The amine reacts with or wets organic resins; the silanol formed after hydrolysis bonds to glass, metal and mineral surfaces. They are the most widely used silane adhesion promoters.
20 products on this page · CAS numbers listed per product
Amino silanes carry a primary or secondary amine on one end and hydrolysable methoxy or ethoxy groups on the other. The amine reacts with or wets organic resins; the silanol formed after hydrolysis bonds to glass, metal and mineral surfaces. They are the most widely used silane adhesion promoters.
Improves bond strength and wet adhesion of sealants, adhesives and coatings to glass, metal and concrete.
Couples glass fibre and mineral fillers to epoxy, phenolic, PA and PU matrices.
Primary, diamino, triamino, secondary and tertiary amino grades for different reactivity and resin systems.
Every product we supply in this family, with its CAS number. Typical values come from the grade TDS; the limits that apply to your order are confirmed in the quotation and contract.
| Product | CAS No. | Key specification | |
|---|---|---|---|
| 3-Aminopropyltriethoxysilane | 919-30-2 | TDS on request | |
| Bis[(3-triethoxysilyl)propyl]amine | 13497-18-2 | TDS on request | |
| 3-Aminopropyltrimethoxysilane | 13822-56-5 | TDS on request | |
| Bis[(3-trimethoxysilyl)propyl]amine | 82985-35-1 | TDS on request | |
| 3-Aminopropylmethyldiethoxysilane | 3179-76-8 | TDS on request | |
| 3-Aminopropylmethyldimethoxysilane | 3663-44-3 | TDS on request | |
| Aminoethylaminopropyltrimethoxysilane | 1760-24-3 | TDS on request | |
| N-bis(3-(trimethylsiloxy)propyl)-1,2-ethanediamine | 68845-16-9 | TDS on request | |
| Aminoethylaminopropyltriethoxysilane | 5089-72-5 | TDS on request | |
| Aminoethylaminopropylmethyldimethoxysilane | 3069-29-2 | TDS on request | |
| Diethylenetriaminopropyltrimethoxysilane | 35141-30-1 | TDS on request | |
| Diethylenetriaminopropylmethyldimethoxysilane | TDS on request | ||
| Piperazinylpropylmethyldimethoxysilane | 128996-12-3 | TDS on request | |
| 3-(N-cyclohexylamino)propyltrimethoxysilane | 3068-78-8 | TDS on request | |
| 3-(N-cyclohexylamino)propylmethyldimethoxysilane | 120218-28-2 | TDS on request | |
| 3-(N-phenylamino)propyltrimethoxysilane | 3068-76-6 | TDS on request | |
| Diethylaminopropyltrimethoxysilane | 41051-80-3 | TDS on request | |
| Diethylaminopropyltriethoxysilane | TDS on request | ||
| Dimethylaminopropyltrimethoxysilane | 2530-86-1 | TDS on request | |
| N-(N-BUTYL)-3-aminopropyltrimethoxysilane | 31024-56-3 | TDS on request |
Added to PU, MS polymer and silicone sealants or used as a primer.
Moisture content of the formulation; shelf life of the cartridge.
Component of glass-fibre sizing and composite coupling.
Compatibility with the sizing film former; matrix resin.
Surface treatment of silica, kaolin, wollastonite and ATH.
Loading on filler surface area; dispersion in compound.
Improves bond of phenolic and furan binders to sand.
Silane level relative to resin; storage of the resin blend.
| Your requirement | What usually works |
|---|---|
| Fast reaction, general purpose | 3-Aminopropyltriethoxysilane or -trimethoxysilane. |
| Higher reactivity, epoxy and PA systems | Diamino silanes (aminoethylaminopropyl grades). |
| Lower reactivity, longer pot life | Secondary amino (N-phenyl, N-cyclohexyl, N-butyl) grades. |
| Ethanol rather than methanol by-product | Ethoxy grades. |
Confirm packaging requirements in the quotation.
Alkoxysilanes hydrolyse in contact with moisture. Keep containers tightly closed, under dry conditions, away from heat. See the SDS for full handling details.
Regular grades are usually in stock. For large volumes, lead time is confirmed in the quotation. We quote FOB and CIF.
Tell us the property you need and where the product goes — that narrows the grade.
Send the product name or TDS you use today; we match the key numbers.
Put both specifications side by side, with units and test methods.
Agree packaging, monthly volume, COA limits and Incoterms before the first order.
Send the product name or CAS, quantity and destination. We reply by email with pricing, availability and documents.
| Information | Example |
|---|---|
| Application | What the product goes into |
| Current product | Grade or supplier you use today |
| Required specification | Your TDS, COA or key limits |
| Quantity | Trial / monthly / annual volume |
| Destination | Country and port |
| Documents needed | COA, TDS, SDS |
Methoxy grades hydrolyse faster and release methanol; ethoxy grades hydrolyse more slowly and release ethanol.
Typical additions are a few tenths of a percent up to about 1–2 % of the formulation, but the right level depends on your system; confirm in a trial.
No. The amine itself catalyses hydrolysis and condensation.
Free samples are available for buyers evaluating the product for production use. Shipping cost is agreed case by case.
Every batch ships with a COA; TDS available on request.
Send your application and current grade. We reply with a matching grade, TDS and quotation.