Which HALS is suitable for agricultural film?

Agricultural film requires strong UV protection together with resistance to pesticides, sulfur-containing chemicals and repeated outdoor exposure. High-molecular-weight HALS are commonly considered for long service life, but the final grade must be compatible with the film resin, thickness and agrochemical environment. Sulfur-resistant or less basic HALS may be needed in demanding greenhouse applications. Validation should include accelerated weathering and chemical-exposure testing.

Why can acidic pigments or flame retardants reduce HALS performance?

Conventional HALS contain basic amine functionality. Acidic pigments, halogenated flame-retardant systems, acidic fillers or certain catalyst residues can interact with or deactivate the HALS, reducing light-stabilization efficiency. In such formulations, formulators may consider less basic or NOR-type HALS, adjust the additive package, or use acid scavengers where appropriate. Compatibility testing is necessary because the interaction depends on the full formulation.

How do high-molecular-weight HALS differ from low-molecular-weight HALS?

Low-molecular-weight HALS generally disperse easily and can provide rapid stabilization, but they may be more prone to migration or extraction. High-molecular-weight or oligomeric HALS usually offer lower volatility, better extraction resistance and longer service life, which is valuable in films, fibres and outdoor articles. The best choice depends on polymer compatibility, article thickness, exposure conditions and contact with water, detergents or chemicals.

Are plastic additives suitable for food-contact or regulated applications?

Suitability depends on the exact additive grade, polymer, use level, food type, temperature and destination market. A general technical grade should not automatically be described as food-contact compliant. Buyers should define the applicable regulation and request supporting declarations, substance identity, purity data and migration or extraction information where required. SUNCHEM can check available documentation for a specific product and supplier, but the finished-material manufacturer remains responsible for confirming compliance of the final formulation and article.

Can UV absorbers and HALS be used together in the same plastic formulation?

Yes. UV absorbers and HALS are frequently used together because they protect the polymer through different mechanisms. The UV absorber reduces the amount of damaging radiation entering the material, while the HALS suppresses radical reactions caused by photo-oxidation. The optimum ratio depends on polymer type, article thickness, pigment system, outdoor exposure and service-life target. Compatibility must also be checked because acidic additives, certain pigments and some flame-retardant systems can reduce HALS effectiveness.

Can you provide COA, SDS/MSDS, and TDS?

Yes. COA, SDS and TDS are available for suitable products. Availability depends on the exact product, manufacturer, destination market and order stage. Additional declarations or test reports can be checked case by case after the buyer provides the product, application and regulatory requirements.

Can you supply both branded and custom specifications?

SUNCHEM supplies selected branded product lines and can evaluate custom specifications or alternative grades through qualified manufacturing partners. Feasibility depends on chemistry, volume, test methods, regulatory requirements and development cost. Custom products require technical review and sample approval before commercial supply.

Do you support long-term supply agreements?

Yes. SUNCHEM can support scheduled deliveries, annual-volume planning, specification management, quality documentation and supply-risk coordination for approved products. Commercial terms depend on forecast accuracy, product availability, payment terms and destination logistics.

Do you support samples?

Sample support is available for qualified evaluation projects, subject to product type, supplier policy, quantity, destination and shipping restrictions. Please provide the product or CAS number, target application, required quantity and courier details. Hazardous or restricted products may require additional review.

How can additive migration, blooming or plate-out be reduced?

Migration and blooming usually occur when an additive has limited compatibility with the polymer, is used above its solubility limit, or is exposed to heat over time. Plate-out may also result from volatility, decomposition or interaction with lubricants and other formulation components. These problems can often be reduced by choosing a higher-molecular-weight or polymeric grade, lowering dosage, improving dispersion and checking the complete additive package. Processing temperature, cooling conditions and storage tests should be included in the evaluation.

How do I choose an antioxidant package for PP, PE, ABS or engineering plastics?

Start with the polymer, processing temperature, residence time, expected service temperature and required regulatory status. PP and PE commonly use a hindered phenolic antioxidant together with a phosphite, while long-term heat ageing may require a thioester synergist. ABS and engineering plastics may need additives with higher thermal stability, lower volatility or better colour control. Other formulation components, including pigments, fillers, recycled resin and flame retardants, can change the required package. The final formulation should therefore be validated by melt-flow, colour, oven-ageing and application-specific testing.

How do I request a quotation?

Send the product name or CAS number, required specification, quantity, application, destination port, preferred Incoterm and documentation requirements. These details allow SUNCHEM to confirm a suitable supply source, packaging, lead time and freight basis before issuing a quotation.

How do I select a halogen-free flame retardant for a plastic application?

Selection begins with the polymer and the required fire standard, such as a target UL 94 rating, limiting oxygen index or smoke requirement. Phosphorus-based systems are commonly considered for PC/ABS, epoxy and intumescent polyolefin applications; melamine-based products are used in selected polyamides; and mineral flame retardants such as aluminum hydroxide or magnesium hydroxide require relatively high loadings. Mechanical properties, processing temperature, moisture sensitivity, electrical performance and colour must be evaluated together with flame resistance. A material described as halogen-free should also be checked against the customer's specific regulatory or test definition.

How much plastic additive should be used in a formulation?

There is no universal dosage. Antioxidants, UV stabilizers and flame retardants have very different use levels, and the effective concentration depends on the polymer, processing history, product thickness, exposure conditions and performance target. Supplier starting ranges can be used for initial trials, but the lowest-cost formulation is not always the lowest dosage because synergistic combinations may perform better. Final dosage should be established through laboratory compounding and tests such as colour, melt-flow retention, oven ageing, weathering and the required flammability standard.

What are the main types of plastic additives and what does each type do?

Plastic additives are selected according to the degradation or processing problem that must be controlled. Primary antioxidants interrupt oxidation reactions, while secondary antioxidants decompose hydroperoxides formed during processing. UV absorbers absorb harmful ultraviolet energy, and hindered amine light stabilizers (HALS) slow photo-oxidation. Flame retardants reduce ignition or flame spread, while processing aids, lubricants, nucleating agents and other specialty additives improve manufacturing or end-use performance. The correct package depends on the polymer, processing temperature, service environment and regulatory requirements.

What information is needed to recommend the right plastic additive?

Please provide the polymer type and grade, processing method and maximum processing temperature, existing formulation, problem to be solved, target service life, exposure conditions, required test standard and destination-market compliance needs. For replacement projects, include the current additive name, dosage and performance gap. This information allows a supplier to compare suitable antioxidant, light-stabilizer, UV-absorber or flame-retardant options and reduces unnecessary trial work.

What is the difference between UV absorbers and HALS light stabilizers?

UV absorbers protect polymers by absorbing ultraviolet radiation and converting it into less harmful energy. HALS do not mainly absorb UV light; instead, they interrupt the photo-oxidation cycle and regenerate during the stabilization process. UV absorbers are especially useful where sufficient material thickness allows effective absorption, while HALS are highly effective in many outdoor plastics, coatings and thin articles. In demanding applications, a UV absorber and a HALS are often combined to improve colour retention, gloss and mechanical-property retention.

What is the difference between plastic additives and masterbatch?

A plastic additive is the functional chemical itself, while a masterbatch is a concentrated mixture of additives or pigments dispersed in a carrier resin. Masterbatch can simplify dosing, reduce dust and improve dispersion, but the carrier and active-content level must be compatible with the final polymer and process.

What is the difference between primary and secondary antioxidants for plastics?

Primary antioxidants, commonly hindered phenols, donate hydrogen to free radicals and help stop the oxidation chain reaction during processing and service life. Secondary antioxidants, such as phosphites and thioesters, decompose hydroperoxides before they generate additional radicals. They are often used together because the combination provides better processing stability and longer-term heat ageing protection than either type alone. Selection and dosage should be confirmed through formulation trials because polymer type, temperature and exposure conditions strongly affect performance.

What plastic additives does SUNCHEM supply?

SUNCHEM supplies antioxidants, light stabilizers, UV absorbers, flame retardants, optical brighteners, polymerization inhibitors and selected processing additives from qualified Chinese manufacturers. Core product lines include SUNNOX® antioxidants, SUNLIGHT® HALS, SUNSORB® UV absorbers and SUNFR® flame retardants. Availability, specification and documentation depend on the exact grade and intended application.

Can SUNCHEM support equivalent-grade evaluation for branded plastic additives?

SUNCHEM can help screen Chinese supply options against the buyer's target specification, application and documentation requirements. Equivalent-grade evaluation should compare chemical identity, active content, physical properties, impurity profile and performance in the customer's formulation. A proposed alternative should not be treated as automatically interchangeable; sampling and application testing remain necessary before commercial approval.

How can buyers compare plastic additive suppliers beyond price?

Compare product identity, test methods, batch consistency, impurity profile, colour, volatility, packaging, documentation, production capacity and change-control practices. Also evaluate whether the supplier understands the application, can support samples and complaints, and can maintain supply during raw-material or logistics disruptions. A lower unit price may create higher total cost if quality variation causes production loss or reformulation.

How should plastic additives be stored and what affects shelf life?

Most plastic additives should be kept in unopened original packaging in a cool, dry, well-ventilated area away from heat, direct sunlight and moisture. Liquid phosphites and hygroscopic products may require tighter moisture control, while powders should be protected from contamination and caking. Shelf life depends on the exact grade, packaging and storage conditions, so the supplier's product-specific recommendation should be followed.

What documents should be checked when sourcing plastic additives from China?

Buyers should review the current specification, recent COA, SDS, TDS, manufacturing origin, packaging, shelf life and any required regulatory declarations. For sensitive applications, confirm test methods, impurity limits, registration status, food-contact support, RoHS or REACH information and change-control procedures. Documents should match the exact grade and manufacturer rather than a generic product name.

How can yellowing caused by antioxidant degradation be reduced?

Yellowing can result from excessive processing temperature, long residence time, an unsuitable antioxidant package, interactions with pigments or flame retardants, or contamination in recycled resin. It can often be reduced by improving temperature control, using a more hydrolytically stable phosphite, balancing primary and secondary antioxidants, and checking additive purity and compatibility. Comparative colour testing after extrusion and heat ageing is essential before changing the formulation.

What is the difference between Antioxidant 1010 and Antioxidant 1076?

Antioxidant 1010 is a high-molecular-weight hindered phenolic antioxidant with very low volatility and is widely used in polyolefins, engineering plastics, elastomers and adhesives. Antioxidant 1076 is also a hindered phenol, but it has a lower molecular weight and can offer easier incorporation in some polymer systems. Both provide long-term thermal oxidation protection. The preferred grade depends on polymer type, processing temperature, volatility requirements, colour target and the other stabilizers in the package.

When should DSTDP or DLTDP be added to an antioxidant package?

DSTDP and DLTDP are thioester secondary antioxidants used mainly when long-term heat-ageing performance is important. They are commonly combined with hindered phenolic antioxidants in polyolefins, wire and cable compounds, automotive parts and other applications exposed to elevated temperatures. They are less focused on initial colour than phosphites and more focused on extended thermal stability. Compatibility, odour, extraction resistance and regulatory requirements should be checked for the final application.

Why are Antioxidant 1010 and Antioxidant 168 often used together?

Antioxidant 1010 is a primary antioxidant that interrupts free-radical oxidation, while Antioxidant 168 is a phosphite secondary antioxidant that decomposes hydroperoxides formed during processing. Using them together provides complementary protection against melt-processing degradation and longer-term ageing. The ratio should be optimized for the polymer, processing temperature, recycled content, colour requirements and expected service life.

Do UV absorbers affect the colour or transparency of plastics?

A properly selected UV absorber normally has limited effect on visible transparency at recommended use levels, but some grades can contribute a slight initial colour or haze, especially at higher dosages or in very clear articles. Dispersion, additive purity, polymer compatibility and processing temperature all influence appearance. Transparent applications should be evaluated using haze, yellowness index and light-transmission measurements.

What is the difference between UV Absorber 326 and UV Absorber 327?

Both are benzotriazole UV absorbers used to protect polymers from ultraviolet degradation. Their differences in molecular structure affect absorption profile, volatility, thermal stability, compatibility and performance in specific polymers. UV 326 is commonly used in polyolefins, PVC, ABS and coatings, while UV 327 may be selected where lower volatility or different compatibility is required. Direct substitution should be confirmed through formulation and weathering tests.

Which UV absorber is suitable for polyolefin films and outdoor plastic products?

The choice depends on polymer type, film thickness, required service life, processing temperature and the presence of pigments or fillers. Benzotriazole UV absorbers are widely used because of their broad UV absorption and thermal stability. Thin films often benefit from a combined package containing both a UV absorber and a HALS. Final selection should be validated through accelerated weathering and outdoor exposure testing.

How do high-molecular-weight HALS differ from low-molecular-weight HALS?

Low-molecular-weight HALS generally disperse easily and can provide rapid stabilization, but they may be more prone to migration or extraction. High-molecular-weight or oligomeric HALS usually offer lower volatility, better extraction resistance and longer service life, which is valuable in films, fibres and outdoor articles. The best choice depends on polymer compatibility, article thickness, exposure conditions and contact with water, detergents or chemicals.

Which HALS is suitable for agricultural film?

Agricultural film requires strong UV protection together with resistance to pesticides, sulfur-containing chemicals and repeated outdoor exposure. High-molecular-weight HALS are commonly considered for long service life, but the final grade must be compatible with the film resin, thickness and agrochemical environment. Sulfur-resistant or less basic HALS may be needed in demanding greenhouse applications. Validation should include accelerated weathering and chemical-exposure testing.

Why can acidic pigments or flame retardants reduce HALS performance?

Conventional HALS contain basic amine functionality. Acidic pigments, halogenated flame-retardant systems, acidic fillers or certain catalyst residues can interact with or deactivate the HALS, reducing light-stabilization efficiency. In such formulations, formulators may consider less basic or NOR-type HALS, adjust the additive package, or use acid scavengers where appropriate. Compatibility testing is necessary because the interaction depends on the full formulation.

Can flame retardants reduce mechanical properties or processing stability?

Yes. High flame-retardant loading can reduce impact strength, elongation, flow or surface quality, while some products may be moisture-sensitive or thermally unstable at the polymer processing temperature. Proper particle size, surface treatment, dispersing conditions and synergists can reduce these effects. Flame performance must be balanced with mechanical, electrical and processing requirements rather than optimized in isolation.

How do ATH and magnesium hydroxide flame retardants differ?

Both are halogen-free mineral flame retardants that release water endothermically and can reduce smoke. Aluminum hydroxide decomposes at a lower temperature and is commonly used in EVA, thermosets, cable compounds and construction materials processed below its decomposition range. Magnesium hydroxide has higher thermal stability and is more suitable for polymers processed at higher temperatures. Both often require relatively high loading, so particle size, surface treatment and mechanical-property retention are important.

What halogen-free flame retardants do you offer?

Available halogen-free options may include phosphate esters such as BDP and RDP, ammonium polyphosphate, melamine-based systems, DOPO derivatives, aluminum hydroxide and magnesium hydroxide. Selection depends on the polymer, processing temperature, target fire rating, smoke requirements and mechanical-property limits. Regulatory status must be confirmed for the exact product and supply chain.

What information is required to select a flame retardant for UL 94 testing?

Provide the polymer and grade, target UL 94 rating, test thickness, processing temperature, colour, mechanical-property requirements, electrical requirements and any halogen-free or smoke restrictions. It is also important to identify fillers, pigments, glass fibre and other additives because they can change flame performance. A supplier can suggest a starting system, but the finished compound must be tested by the responsible manufacturer or an accredited laboratory.

What is DOPO used for?

DOPO is a reactive phosphorus-containing flame-retardant intermediate used in epoxy resins and other thermosetting systems, including selected electronic laminates, encapsulants and composite applications. It is often used to introduce phosphorus into the polymer structure, but formulation and curing performance must be validated in the final resin system.

What is TBBPA and where is it used?

TBBPA, or tetrabromobisphenol A, is a brominated flame retardant used mainly as a reactive component in epoxy resins for printed circuit board laminates and, in some applications, as an additive in polymers such as ABS. The suitable grade and use level depend on the resin system, target fire standard and destination-market requirements.

What is the difference between reactive and additive flame retardants?

Reactive flame retardants chemically bond into the polymer or resin network during manufacture, which can reduce migration and improve permanence. Additive flame retardants are physically blended into the polymer and are generally easier to formulate across different materials. Reactive systems are common in selected epoxy, polyurethane and unsaturated polyester applications, while additive systems are widely used in thermoplastics. The choice affects processing, mechanical properties, recyclability and regulatory performance.

Can too much optical brightener cause colour problems?

Yes. Excessive dosage may produce a bluish or greenish cast, uneven colour, fluorescence saturation or migration. The optimum level is often low and depends on the base resin, pigments, fillers and article thickness. Dosage should be established by colour measurement and visual comparison under relevant lighting.

How do I choose an optical brightener for plastics?

Selection depends on polymer compatibility, processing temperature, colour target, migration resistance and required transparency. A brightener suitable for PVC may not be ideal for high-temperature engineering plastics. Comparative trials should evaluate dosage, whiteness, hue, thermal stability and long-term colour retention.

What is an optical brightener and how does it improve polymer appearance?

An optical brightener absorbs ultraviolet light and re-emits part of it as blue visible light, reducing the visual effect of yellowing and making white or light-coloured plastics appear brighter. It does not remove the underlying cause of degradation, so antioxidant and light-stabilizer packages may still be required.

How do nucleating agents affect polypropylene performance?

Nucleating agents promote faster and more uniform crystallization in polypropylene. They can shorten moulding cycles and improve stiffness, dimensional stability or clarity depending on the grade. Performance depends on resin type, cooling conditions, dosage and dispersion.

What do processing aids do in plastic manufacturing?

Processing aids can improve melt flow, fusion, dispersion, surface finish, release or throughput. Their function depends on the polymer and process. They may reduce melt fracture in extrusion, improve PVC fusion, assist filler dispersion or lower equipment deposits. Selection must consider downstream properties and possible migration.

What is the difference between internal and external lubricants in plastics?

Internal lubricants reduce friction within the polymer melt and can improve flow, while external lubricants reduce adhesion between the polymer and metal processing surfaces. Many formulations require a balance of both. Excess lubricant can reduce fusion, printing, bonding or mechanical properties, so dosage should be optimized experimentally.

Can polymerization inhibitor concentration decrease during storage?

Yes. Inhibitors can be consumed by oxygen, radicals, contaminants, heat or light over time. Long storage, elevated temperature and poor circulation may create uneven inhibitor levels. Users should follow product-specific monitoring, temperature-control and replenishment procedures and should not rely only on the original loading concentration.

How should a polymerization inhibitor be selected for monomers?

Selection starts with the monomer chemistry, process temperature, oxygen availability, storage duration and downstream polymerization method. Some inhibitors require dissolved oxygen to work effectively, while others are used for high-temperature processing or emergency protection. Removal or residual-inhibitor requirements must also be considered.

What is the purpose of a polymerization inhibitor?

A polymerization inhibitor slows or prevents unwanted polymerization during manufacture, storage and transport of reactive monomers. It helps reduce heat generation, viscosity increase, gel formation and equipment fouling. The inhibitor type and concentration must match the monomer, oxygen level, storage temperature and expected holding time.

Can plastic additives be used in recycled polymers?

Yes. Recycled polymers often require restabilization because previous processing and service life have consumed part of the original additive package. Antioxidants, compatibilizers, odour-control products, chain extenders or light stabilizers may be considered. The correct package depends on contamination, degradation level and target application.

자주 묻는 질문

농업용 필름에 적합한 HALS는 무엇입니까??

산성 색소나 난연제가 HALS 성능을 감소시킬 수 있는 이유는 무엇입니까??

고분자량 HALS는 저분자량 HALS와 어떻게 다른가요??

칠월 16, 2026

전자제품 제조용 특수 폴리머 및 첨가제

집 | 주제 |

전자제품 제조에서는 폴리머 재료에 대한 특별한 요구가 발생합니다.. 하우징, 커넥터, 캡슐화제, 필름과 접착제는 납땜 온도를 견뎌야 합니다., 점화에 저항하다, 치수 공차를 유지하고 열과 습도에서 수년간 특성을 유지합니다.. 이러한 요구 사항을 충족하는 것은 기본 수지만으로는 거의 이루어지지 않습니다. 이는 특수 폴리머와 그 내부의 첨가제 패키지의 조합에 관한 것입니다.. 이 기사에서는 주요 재료 제품군 전자 제품 구매자 소스를 매핑합니다., 그리고 그에 수반되는 문서 관련 질문.

전자 응용 분야에 안정적인 폴리머 재료가 필요한 이유

소비자 장치 또는 서버 랙의 폴리머 부품이 리플로우 솔더링 피크에 직면함, 지속적인 작동 열, 일부 환경에서의 UV 노출, UL 등 엄격한 안전 요구 사항 94 가연성 등급. 불안정하거나 제대로 안정화되지 않은 폴리머는 변색됩니다., 시간이 지남에 따라 부서지기 쉽고 전기적 특성을 잃습니다.. 구매자를 위한, 이것은 두 가지를 의미합니다: 재료 선택은 용도에 따라 다릅니다., 종종 데이터시트에 표시되지 않는 첨가제 패키지는 폴리머 등급 이름만큼 중요합니다..

전자제품용 난연제

난연성은 인클로저로 인해 전자 재료의 고정 장치입니다., 커넥터 및 PCB 요구 사항. 시장은 특정 기존 브롬화 유형에서 할로겐 프리 옵션(인 기반 난연제)으로 전환하고 있습니다., 금속 수산화물 및 질소 기반 시스템 - RoHS에 따라 구동, REACH 및 고객별 할로겐 프리 정책. 소싱할 때, 핵심 질문은 어떤 난연성 화학 물질이 사용되는지입니다., 목표 UL을 충족하는지 여부 94 벽 두께에 따른 등급, 다운스트림 고객이 적용하는 무할로겐 정의를 충족하는지 여부. 우리의 난연제 카테고리에는 주요 제품군이 포함됩니다..

UV 흡수제, 항산화제 및 안정제

안정제 시스템은 가공 중 및 사용 수명 동안 폴리머를 보호합니다.: 항산화제 (방해 페놀, 아인산염) 컴파운딩 및 성형 중 열 분해 방지; UV 흡수제 및 HALS는 빛에 노출된 부품을 보호합니다.; 특수 보조 안정제는 금속 접촉 또는 가수분해를 해결합니다.. 전자제품 분야, 가스 방출 및 블루밍이 접점과 광학 장치를 오염시킬 수 있으므로 저휘발성 및 저이행 등급이 중요합니다.. 구매자는 해당되는 경우 첨가제의 휘발성 데이터와 식품 접촉 또는 전자 관련 이동 정보를 요청해야 합니다., 일반적인 제품명뿐만 아니라. 우리를 참조하십시오 플라스틱 첨가제 일반가족 카테고리.

실리콘 및 불소중합체 소재

유기 폴리머가 한계에 도달하는 곳, 실리콘 및 불소중합체 소재가 대체: 열 관리를 위한 실리콘 캡슐화제 및 열 인터페이스 재료, 씰 및 키패드용 실리콘 고무, 고주파 절연 및 화학적으로 공격적인 환경을 위한 불소중합체. 중국의 실리콘 생산 기반은 넓습니다., 등급과 일관성은 생산자마다 다르지만 — 자세한 내용은 다음 노트에서 다루겠습니다. 중국에서 실리콘 재료 공급.

전자제품 구매자를 위한 문서화 및 규정 준수 질문

전자 공급망에는 일반 플라스틱 구매자가 거의 볼 수 없는 문서화 의무가 있습니다.. 주문하기 전에, 밝히다: 지원 선언이 포함된 RoHS 및 REACH SVHC 상태; 할로겐 프리 주장이 이루어진 할로겐 함량 데이터; 화합물에 대한 UL 옐로우 카드 또는 이에 상응하는 가연성 문서, 관련된 경우; 각 로트에 대해 합의된 사양에 대한 COA; 목적지 국가 형식의 SDS 품질. 자격을 갖춘 전자 프로그램에 사용되는 첨가제 및 폴리머용, 변경 관리 문제도 마찬가지입니다. 예고 없이 재구성하는 공급업체는 자격을 무효화할 수 있습니다., 따라서 서면 변경 통지 약속은 사전에 협상할 가치가 있습니다..

구매자 체크리스트: 전자제품용 폴리머 및 첨가제

먼저 애플리케이션 요구사항을 정의하세요.: 온도, 가연성 등급, 전기적 특성, 예상 서비스 수명.
어떤 난연제 및 안정제 화학물질이 사용되는지 문의하세요., 필요한 경우 무할로겐 상태를 확인하세요..
RoHS/REACH 선언 및 로트 수준 COA를 표준 주문 문서로 요청.
접점이나 광학 장치 근처에 사용되는 첨가제의 휘발성 및 마이그레이션 데이터를 확인하세요..
볼륨을 커밋하기 전에 샘플에 대해 애플리케이션 수준 테스트를 실행하세요..
변경 알림 조건에 동의하면 재구성으로 인해 자격이 자동으로 중단되지 않습니다..

SUNCHEM이 도울 수 있는 방법

SUNCHEM은 플라스틱 첨가제 분야에서 자격을 갖춘 중국 생산자와 협력합니다., 난연제, 수지 원료 및 실리콘 재료, 사양 정렬을 지원할 수 있습니다., 적합한 제품 및 주문 단계에 대한 샘플링 및 문서화 커뮤니케이션. 특정 전자 등급 요구 사항을 충족할 수 있는지 여부는 제품 유형에 따라 제품별로 항상 확인됩니다., 공급자 가용성, 주문 단계 및 대상 요구 사항 - 가정이 아닌. 전자 응용 분야에 고분자 재료나 첨가제를 공급하는 경우, 연락하다 귀하의 사양에 맞춰 현실적인 공급 옵션을 논의할 수 있습니다..

비교 차원	항산화제 1010	항산화제 168
화학적 역할	1차 항산화제 (방해된 페놀 유형) — 산화 라디칼 사슬을 방해하기 위해 수소 원자를 기증합니다..	2차 항산화제 (아인산염 유형) — 과산화수소를 안정하게 감소시킵니다., 비반응성 알코올.
기능 메커니즘	자유 라디칼 소거 — 전파 단계에서 연쇄 반응을 끊습니다..	과산화수소 분해 — 반응성 중간체가 새로운 라디칼을 생성하기 전에 제거합니다..
폴리머 보호 역할	폴리머의 사용 수명 동안 장기적인 열산화 분해로부터 보호합니다..	가공 단계 열화로부터 보호 - 열 및 전단으로 인한 변색 및 재산 손실.
가공 안정성	처리 중 적당한 보호에 기여합니다.; 주요 강점은 장기적인 안정화입니다..	강력한 용융상 안정성 제공 - 압출 및 성형 중 색상 유지 및 점도 제어.
장기적인 안정성	제품 수명 전반에 걸쳐 강력한 장기 열 산화 안정성을 제공합니다..	제한된 장기 안정성만으로는; 1차 항산화제와 결합 시 가장 강력함.
일반적인 응용 분야	폴리프로필렌, 폴리에틸렌, 엔지니어링 플라스틱, 섬유, 필름 - 범용 장기 열 안정화.	동일한 기본 폴리머 제품군, 특히 배합 시 적용됨, 압출, 및 성형 단계.
일반적인 사용 시나리오	가공조건이 적당하고 장기 내열노화성이 우선시되는 곳에 단독으로 사용.	단독으로 사용하는 경우는 거의 없음; 일반적으로 시너지 안정화 패키지의 일부로 1차 항산화제와 결합됩니다..

제품명	항산화제 168 (트리스(2,4-디-tert-부틸페닐) 인화물)
상표	썬녹스® 168
CAS 번호.	31570-04-4
화학 카테고리	2차 항산화제 (인화물) / 플라스틱 첨가제
주요 기능	폴리머 가공 중에 형성된 과산화수소를 분해합니다., 가공 안정성 및 색상 유지 보호
애플리케이션	폴리올레핀, 엔지니어링 플라스틱, 영화 & 섬유 압출, 합성 & 마스터배치, 식품 접촉 폴리머 — 아래에서 전체 목록을 확인하세요

CAS 번호.	31570-04-4
화학식	C42H63O3P
화학 동의어	이르가포스® 168; 이르가녹스® 168; 송녹스® 1680; 호스타녹스 페어 24; ADK 스탭 2112; 알카녹스 240; 트리스(2,4-디-tert-부틸페닐) 인화물 — 요청 시 전체 동의어 목록 제공

녹는 점	181–184 °씨 (문학.)
비점	594.2 °고양이 760 mmHg
인화점	394 °씨
모습	SUNCHEM 확인 보류 중 — 전형적인 상업 형태 (예를 들어. 분말/과립) 실제 공급 등급과 비교하여 확인해야 합니다.
스토리지 권장사항	SUNCHEM 확인 보류 중 — 아인산염 항산화제는 일반적으로 수분/가수분해에 민감합니다.; 특정 보관 온도 및 유통기한 데이터 확인 필요

항산화제 종류	반성 (인화물), 과산화수소 분해기
공통 페어링	1차 페놀성 항산화제와 자주 결합됨 — 예를 들어. 항산화제 1010 — 시너지 보호를 위해
복용량	SUNCHEM 확인 보류 중 — 폴리머와 공정에 따라 다름; 귀하의 응용 분야에 대한 지침은 SUNCHEM 기술 팀에 문의하십시오.

	항산화제 168 (썬녹스® 168)	항산화제 1010 (썬녹스® 1010)
CAS 번호.	31570-04-4	6683-19-8
유형	2차 항산화제 (인화물)	1차 항산화제 (방해된 페놀성)
기구	과산화수소 분해기	활성산소 제거제
주요 역할	고온 가공 안정성	장기적인 열산화 보호
종종 다음과 결합됩니다.	항산화제 1010 (오른쪽 참조)	항산화제 168 (왼쪽 참조)

제품	CAS 번호.	나뭇가지	기구	최고의 대상
항산화제 1010	6683-19-8	주요한	라디칼 청소부	기본 기본 선택; 넓은 폴리올레핀 / 엔지니어링 플라스틱 사용	보다 →
항산화제 1076	2082-79-3	주요한	라디칼 청소부	낮은 융점 (50–52°씨) — 일부 공정에서 취급/분산이 더 용이함	보다 →
항산화제 168	31570-04-4	반성	과산화수소 분해기	고온 가공 안정성	보다 →
DSTDP	693-36-7	티오에스테르	과산화수소 분해기	비용 효율적인 장기 열 노화	보다 →
DLTDP	123-28-4	티오에스테르	과산화수소 분해기	DSTDP의 대안, 체인 길이가 다름	보다 →

제품명	항산화제 1010 (펜타에리트리톨 테트라키스[3-(3,5-디-tert-부틸-4-히드록시페닐)propionate])
상표	SUNNOX® 1010
CAS 번호.	6683-19-8
화학 카테고리	방해 페놀 1차 항산화제 / 플라스틱 첨가제
주요 기능	가공 중 산화분해 방지 및 장기간의 사용수명 보장
애플리케이션	폴리올레핀, 엔지니어링 플라스틱, PVC & 고무, 식품 접촉 폴리머, 섬유 & 영화, 접착제 - 아래 전체 목록 참조

밀도	1.077 g/cm3
비점	1005.8°C에서 760 mmHg
녹는 점	115-118°C (12월)
인화점	247.3℃
굴절률	1.535
형태	정돈된
pKa	11.71 ± 0.40 (예측)
보관 온도	2-8°C

항산화제 종류	주요한 (방해된 페놀성), 활성산소 제거제
공통 페어링	2차 항산화제와 자주 결합됨 (예를 들어. 항산화제 168) 시너지 보호를 위해
복용량	폴리머 및 공정에 따라 다름 - 귀하의 응용 분야에 대한 지침은 SUNCHEM 기술 팀에 문의하십시오.

자주 묻는 질문

제품 및 솔루션

CDMA

특수 화학물질

폴리머 및 재료

제약 및 중간체

제약 중간체

기능식품

전자제품 제조용 특수 폴리머 및 첨가제

전자 응용 분야에 안정적인 폴리머 재료가 필요한 이유

전자제품용 난연제

UV 흡수제, 항산화제 및 안정제

실리콘 및 불소중합체 소재

전자제품 구매자를 위한 문서화 및 규정 준수 질문

구매자 체크리스트: 전자제품용 폴리머 및 첨가제

SUNCHEM이 도울 수 있는 방법

관련 독서

항산화제 1010 vs 항산화제 168: 차이점, 역할, 그리고 언제 함께 사용하는가

1차 항산화제 vs 2차 항산화제

항산화제 1010 vs 항산화제 168 비교표

기술 메커니즘 설명

항산화제 1010 — 1차 항산화제

항산화제 168 — 2차 항산화제

왜 항산화제인가? 1010 그리고 168 함께 일하다

1차 항산화제 (1010)

2차 항산화제 (168)

= 복합시스템

구매자 결정 가이드

항산화제를 선택하세요 1010

항산화제를 선택하세요 168

조합 시스템을 선택하세요

애플리케이션

폴리프로필렌 (PP)

폴리에틸렌 (체육)

엔지니어링 플라스틱

폴리머 가공 (일반적인)

왜 SUNCHEM을 소스로 삼아야 할까요?

관련 상품

항산화제 1010

항산화제 168

항산화 지식 허브

자주 묻는 질문

항산화제의 차이점은 무엇인가요? 1010 및 항산화제 168?

항산화제를 사용해야 할까요? 1010 또는 항산화제 168?

항산화제 가능 1010 및 항산화제 168 함께 사용하다?

1차 및 2차 항산화제는 어떻게 함께 작용합니까??

올바른 항산화 시스템을 선택하는 데 도움이 필요합니다?

항산화제 168 (썬녹스® 168) — 가공안정성을 위한 2차 항산화제

한눈에 보는 제품정보

제품개요

항산화제란? 168?

왜 사용됩니까??

구매자가 IT 없이 직면하는 어려움?

폴리머 제조업체에 어떻게 도움이 됩니까??

기술 사양

화학정보

속성

애플리케이션 노트

애플리케이션 & 제공되는 산업

폴리올레핀 (체육 / PP)

엔지니어링 플라스틱 (아빠, 애완 동물)

영화 & 섬유 압출

합성 & 마스터배치

식품 접촉 폴리머 포장

왜 항산화제인가? 168 항산화제와 함께 사용됩니다. 1010

비교 / 등가물 — 항산화제 168 vs 항산화제 1010

왜 항산화제를 공급해야 할까요? 168 썬켐에서

적격 생산자 선택

품질 & 문서 지원

내보내다 & 물류 조정

유연한 소싱 솔루션

장기 공급 관리

SUNCHEM 공급망 프로세스

서류 & 품질

공개 문서

통제 문서

포장, MOQ & 물류 센터

포장

MOQ & 리드타임

내보내다 & 해운